Injection Blow Molding – MSZ45
Belong to Injection Blow Molding
Product Introduction: Horizontal injection: plasticizing stable, easy to operate Bridge type clamping structure, it is more convenient to remove the mould Variable pump control system, the electricity saving more Large capacity mold installation size, higher yield
Fill out my online form.
Details
The mold cavity number
Approx. Volume (ml) |
Max. body diameter (mm) |
Mini. neck diameter (mm) |
Max. Height (mm) |
Min. Weight (g) |
Ceter Distance (mm) |
Max. Cavitation (cav) |
---|---|---|---|---|---|---|
10 | 24 | 8 | 60 | 3 | 35 | 13 |
60 | 42 | 14 | 90 | 7 | 50 | 9 |
150 | 60 | 20 | 120 | 15 | 80 | 6 |
300 | 60 | 30 | 170 | 35 | 120 | 3 |
The equipment size

Technical features:
Horizontal injection: plasticizing stable, easy to operate
Bridge type clamping structure, it is more convenient to remove the mould
Variable pump control system, the electricity saving more
Large capacity mold installation size, higher yield
Optional:
Servo drive, and can realize energy-saving 25-45%
The main technical parameters:
Injection System | Unit | MSZ45 |
---|---|---|
Screw Diameter | mm | 45 |
Screw L/D | 22:1 | |
Injection weight(HDPE) | g | 241 |
Max. screw speed | rpm | 10-235 |
Heating Capacity | kw | 10 |
Clamping & blowing system | ||
Clamping force of injection | kn | 452 |
Clamping force of blowing | kn | 75.4 |
Max. platen size (LxW) | mm | 560×390 |
Min. Mold thickness (H) | mm | 240 |
Heating Capacity of mould | kw | 3.6 |
Stripping System | ||
Stripping Stroke | mm | 220 |
Dry cycle | sec | 3 |
Driving System | ||
Motor power | kw | 22 |
Hydraulic pressure | mpa | 15 |
Product Range | ||
Suitable Bottle Range | ml | 3-800 |
Max. Bottle Height | mm | ≤200 |
Max. Dia of bottle | mm | ≤100 |
Others | ||
Min. Air pressure | mpa | 1.0 |
Discharge rate of compressed air | M3/mm | ≥0.7 |
Water flowage | M3/h | 4 |
Total rated power with mold heating | kw | 35.6 |
Dimension (LxWxH) | m | 4.0×1.4×2.5 |
Net weight | ton | 6.1 |